Forty years of product knowledge brings you the best the market has to offer! Quest-Tec Solutions is a young company with a long lineage of quality, experience and care. The development and engineering of the liquid level gage and valve product lines began more than forty years ago.
|
Quest-Tec Offset Valves
Glass-Trac Type 1 & 2 Offset Gage Valves are available with screwed (S), union (U), (illustrated below) and tubular (T) gage connections (Page 15). Both 1 and 2 Valves are used with Reflex and Transparent Gages in working pressures up to 4000 psi and with Tubular Gages to their maximum rating. The Teflon packing ring is standard and used in services up to 450º F. For temperatures to 700º F, valves are fitted with special wire graphite packing. Both valves have stainless steel ball checks to shut off the flow automatically in case of gage glass breakage. The “offset” feature permits easy cleaning of gages. A floating tailpiece on Type 1 valves permits an overall vertical adjustment of 1/8” if the gage center-to-centers are not precisely located. Installation is quicker and gage strain is eliminated. Type 2 Valves have an optional backseating stem allowing the packing to be changed without shutting down the vessel. 4000 psig CWP 6000 psig Test
*Item No. 13 has hole with 1/16 eccentricity for ± 1/8 maximum misalignment on the overall center-to-center. Note: Valve shown is for bottom left hand (or top right hand) location. Opposite hand is reversed. Valves are furnished in pairs of one bottom left hand and one top left hand. Note: 316 SS wetted parts not available in Type 1 valves. Type 1S Type 1U Type 2S Type 2U
TYPE 3S & 3U 4000 psig CWP 6000 psig Test The Glass-Trac Type 3 Offset Gage Valve has the Outside Screw & Yoke design which prevents excessively hot and corrosive fluids from contracting stem threads, causing possible malfunction. The stem backs directly off the regrindable valve seat using the positive, non-rotating stem principle. The valve is offset for ease in gage cleaning and comes in both screwed (S) and a union (U) gage as standard. On special order, tubular (T) gage or other type connection can be supplied. Type 3 valves are used with Reflex and Transparent Gages in working pressures up to 4000 psi. The standard tank connection for Type 3 OS&Y Offset Gage valves is a ¾” NPT solid shank, with optional ½” and 1” NPT sizes. Ends beveled for welding also are available. Valve materials include forged carbon steel and 316 stainless steel. A molded Teflon packing ring is standard at no extra cost in valves for services up to 450º F. For temperatures to 700º F, valves have wire-graphite packing. The Type 3 valve has stainless steel safety ball checks to shut off the flow automatically in case of gage glass breakage.
TYPE 3S
TYPE 3U A Tubular Gage Connection is available on request. Optional Tank Connections shown on pages 26 and 27. Optional Gage Connections shown on page 25
TYPE 7S & 7U The Glass-Trac Type 7 Offset Gage Valve features the Outside Screw & Yoke (OS&Y) design which prevents excessively hot and corrosive fluids from contacting stem threads. The stem uses the positive non-rotating stem principle and backs directly off the regrindable seat. This valve is offset for ease in gage cleaning and is available in screwed (S) and union (U) gage connections. The Type 7 Valve also has a backseating stem as a standard feature. Stainless steel ball checks are available upon request. 1440 psig CWP, 2160 psig Test (600 Ibs. Class)
NOTE: Valve shown is for bottom left hand (or top right hand) location. Opposite and is reversed. Valves are furnished in pairs of one bottom left hand and one top left hand.
A Tubular Gage Connection is available on request. Optional Gage Connections shown on page 25. Optional Tank Connections shown on pages 26 and 27. A Ball Check Valve is available on request.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
