Steam-Trac Direct Reading Steam / Water Gauges

Quick Links: Dimensional Data | Ordering Information | Installation Data | Related Valves | Replacement Parts | Documents and Drawing
ST-1600 - For 1600 PSI Working Steam Pressure (WSP)

1600ST-1600 STEAM-TRAC DIRECT READING STEAM/WATER GAUGES

Materials
Chamber:
 A-516, Grade 70 Carbon Steel
Gasket Grafoil® GHR
Shield HQ Mica
GLASS Tempered Borosilicate
Cover A-516, Grade 70 Carbon Steel
Washers 17-7 PH Stainless Steel, Cadmium Plated
U-Bolts A193-B7, Cadmium Plated
Nuts A194-2H, Cadmium Plated

For 1600 PSI Working Steam Pressure (WSP)

Steam-Trac ST-1600 steam gages are ruggedly built to set the industry standard for reliability in the difficult mid-pressure range from 1000 to 1600 PSI Working Steam Pressure. All materials and construction standards are within strict compliance of ASME Section 1 code requirements.

The Steam-Trac ST-1600 can be configured to replace less durable, more expensive, competitive models or for specific construction projects. Visible range must be achieved by using multiple sections with a 1” minimum overlap to ensure continuous visibility, as required by ASME Section 1, PG-60.

To reduce expensive maintenance cycles, the Steam-Trac ST-1600 is built with a gage chamber that is reinforced to minimize lateral deflection of the gage chamber which is the primary cause of gasket or mica failure in steam gages. Consistent load on the gage cover is ensured with the liberal use of spring washers.

 

 

Dimensional Data, etc.

[Back to the Top]

 

 

Ordering Information
The following information is required for prompt, accurate cost quotations and order processing:
*Maximum Operating Steam Pressue
*Steam Water Connection Size and Type
*Other Plant Piping Tie-Ins
*Gage Valve Requirements

[Back to the Top]

 

 

Installation Data (Click picture for more info)

TANK CONNECTION DATA

INSTALLATION INFORMATION

 

[Back to the Top]

 

 

Steam Valves up to 3000 PSI

Conval Clampseal® Valves

The most advanced forged valve available, the Clampseal® Valve features the following:

  • Cartridge Replaceable Packing Chamber: Fastest repacking of any valve by swapping bonnet assembly. Minimum packing volume reduces shrinkage and repacking costs. Graphite packing standard on all valves. Other options are available
  • Acme Body - Yoke Connection: Strong and reliable for repeated valve maintenance
  • Pressure Actuated Backseat: Backseat requires very low torque for total isolation of packing. Provides guide journal for steam, avoiding side load packing.
  • Electroless - Nickel Plating: Also available is stainless steel for wetted parts
  • Integral Gland Wrench: Makes packing adjustments simple. Provides lock on packing gland. Available on all size valves.
  • Single Piece Packing Gland: One step packing adjustment ensures concentric loading.
  • Optional Live Loaded Gland
  • Unique Pressure Seal Bonnet: Effective sealing accomplished without welds or gaskets
  • Self Aligning Seating: Disc-Retainer firmly engaged to stem yet free to align perfectly to seat. Made possible by advanced electron beam welding.
  • Solid Sellite™ Seat and Disc: Line contact seating for positive tight shutoff. Two stage pressure drop for reduced wear of seating surfaces. Abundant material for repeated refacing of seat surfaces.


T-Pattern Stop, Check and Stop Check Valves

T-pattern, vertical stem globe valves provide easily accessible stems and extensions for remote manual operation.

  • Available in 1/2" to 3"
  • ASME pressure classes through:
    • 4095, A105, F22, F91, F316, F347,
    • Inconel ™, Monel™ and other materials.
  

[Back to the Top]

 

 

Replacement Parts

Glass, Gaskets, and Shields

  • Completely interchangeable with competitive manufactures Industry standard glass sizes 1-9
  • Tempered borosilicate glass as standard
  • Tempered Aluminosilicate glass available for higher temperature
  • Standard gasket is stainless steel reinforced Grafoil Grade GHR
  • HQ Mica shields - (.009 to .012).
  • All other gasket and shield materials are available in standard gage glass sizes.
  • Any/all level gage components are available. Please consult factory.

[Back to the Top]

 

 

Document Number Description File Size Download
Product Bulletins
200-04 ST-1600 Steam-Trac Brochure 250kb Download
Technical Documents
210-00 Direct Reading Water Gage Selection Guide 215kb Download
220-11 ST-1600 Steam-Trac 1 Section Drawing 235kb Download
220-12 ST-1600 Steam-Trac 2 Section Drawing 317kb Download
220-13 ST-1600 Steam-Trac 3 Section Drawing 330kb Download
220-14 ST-1600 Steam-Trac 4 Section Drawing 343kb Download
230-00 IOM for Steam-Trac 300-1600 500kb Download

 

 

Home | About Us | Products | Services | Software | Contact Us