Level Transmitters

BENEFITS:

• Process connections from 3/4" NPT and flanges from 1" ANSI
• Measurement ranges with cable probe up to 32 m
• Measurement ranges with rod probe up to 6 m
• Measurement ranges with coax probe up to 6 m
• Simple setup with adjustment
  Local PLICSCOM indication and programming module
• No recalibration required
• Detachable rod and cable probes for easy replacement
• Two-wire, loop-powered
• Insensitive to vapor, dust, condensation, or buildup
• FM, CSA, WHG, and ATEX approvals
  

LEVEL MEASUREMENT:

• Continuous level measurement of liquids and powdery to granular bulk solids
  
• Reliable measurement in process temperatures up to 400°C and
  pressures up to 400 bar with the VEGAFLEX 66
  
• Measurement in the presence of foam or agitation
  
• 4-20 mA HART®, Foundation Fieldbus®, and Profibus PA outputs available
  
• SIL2 Qualified (IEC 61508/61511 Standards)
  

Click HERE to download Bridle Specification Guide

Level measurement:
Continuous level measurement of powdery to granular bulk solids e.g. plastic granulate and liquids.

• Measurement independent of density or bulk weight, conductivity, dielectric constant, temperature and dust e.g. during pneumatic filling.
• Measurement is also possible in the event of foam or if the surface is very turbulent.
• The HART with 4 to 20 mA analog, PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration.
• Application in safety related systems (overspill protection) with requirements for functional safety up to SIL 2 in accordance with IEC 61508/IEC 61511-1.
• WHG approval

Interface measurement

• Continuous measurement of interfaces between two liquids with very different dielectric constants, such as in the case of oil and water for example.
• Measurement independent of density, conductivity and temperature
  
• Electronics version for the simultaneous measurement of the level of interfaces and the total level in liquids. The HART with 4 to 20 mA analog protocol is available for system integration.
  
• Special version for the measurement of the level of interfaces at a constant total level. The PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration

• up to 4 m / 13 ft (Rod probe, Coax probe) up to 35m / 114 ft (Rope probe)

• 1.6 (Rod probe, Rope probe)
  
• 1.4 (Coax probe)

• Rod probe
  
• Coax probe
  
• Rope probe