Category: Level-Trac

View the Level-Trac System Summary.

Level-Trac products include water columns and probes capable of operating in applications up to 3000 PSI as well as broad line of Water Detection Control Units & Alarms.

Level-Trac LT-500

Low Pressure Probe Manifold

  • Max 1000 PSI
  • SA-105 Extruded Chamber
  • Horizontal Probe Mounting
  • Probe Spacing per Customer’s Requirements
  • Optional Connections for Direct Reading Sight Glasses
  • Type 800, TFE Insulated Probe
  • Piping Connections to Meet Customer Specifications

Level-Trac LT-501

Medium Pressure Probe Manifold

  • Max 2000 PSI
  • Extruded A-105 Column
  • Probe Spacing per Customer’s Requirements
  • Optional Connections for Direct Reading Sight Glasses
  • Piping Connections to Meet Customer Specifications
  • Type 810, Zirconia Insulated Probe
  • Piping Connections to Meet Customer Specifications

Level-Trac LT-502

Medium Pressure Probe Manifold

  • Max 3000 PSI
  • 2” Schedule 160, A-106B Chamber
  • Level-Lock Fittings that Ensure Full Penetration Welds
  • Probe Spacing per Customer Requirements
  • Optional Connections for Direct Reading Sight Glasses
  • Type 820 Probes
  • Piping Connections to Meet Customer Specifications

Level-Trac LT-40 / LT-41

Point Level Switch

  • LT-40-01: One Type 800, TFE insulated probe, rated to 1000 PSI
  • LT-40-02: Two Type 800, TFE insulated probes, rated to 1000 PSI
  • LT-41-01: One Type 810, Zirconia insulated, brazed probe, rated to 2000 PSI
  • LT-41-02: Two Type 810, Zirconia insulated, brazed probes, rated to 2000 PSI

Level-Trac LT-210

Electronic Control Unit

  • One to Twelve Probe Channels
  • 4-20mA Output Signal
  • Field Programmable Alarm and Trip Points
  • Voting Logic for Trips
  • Serial Remote Display Signal
  • Sequence Fault Detection
  • Single Power Supply

Level-Trac LT-230

Electronic Control Unit

  • Up to 36 Probe Channels
  • 4-20mA Output Signal
  • Programmable Alarm and Trip Points
  • Voting Logic for Trips
  • Serial Remote Display Signal
  • Sequence Fault Detection
  • LED Display on unit (optional)

Level-Trac LT-420

Control Unit for Guided Wave Radar

  • 4-20mA Output Signal
  • Programmable Alarm & Trip Points from Guided Wave Radar
  • Serial Remote Display Signal – Optional Fiber Optic
  • Ability to power three remote indicators
  • 4 – Relays, 8 AMP per relay
  • ASME PG60.1.1.2 Code Compliant

Level-Trac LT-310

Electronic Control Unit

  • Six Discrete Channels
  • Six Field Assignable Auxiliary Relays
  • Two Independent Power Supply Units
  • Probe Cable Fault Monitoring
  • No Maintenance or Routine Testing
  • Fault Detection

Level-Trac LT-440

Control Unit for Guided Wave Radar

  • NEMA 4X Fiberglass Reinforced Polyester Enclosure
  • 100-240 VAC 48-63 Hz Power Supply
  • Data Collected from (4) Thermocouple inputs to correct water density error.
  • Loop input for drum temperature
  • System Fault Logic and Indication
  • Low Power Consumption, 0.25 Amp Maximum

Alarm and Trip Logic

  • Four DPDT relays for alarm and trip actuation
  • Dedicated DPDT relay to be programmed and used as the application requires

Door mounted indicator Fault Logic

  • Illuminate if a thermocouple zeros or exceeds a given set point
  • any individual thermocouple that indicates a failure will be ignored when estimating water temperature

Level-Trac Model LT-302

Control Unit

  • NEMA 4X Fiberglass Reinforced Polyester Enclosure
  • 100-240 VAC 48-63 Hz Power Supply
  • Low Voltage (5 VAC) to probes
  • Voting Logic Controlled Trip Circuits
  • System Fault Logic and Indication
  • Circuit Test Buttons
  • Adjustable Time Delay
  • Three Ranges of Sensitivity
  • Low Power Consumption, 0.12 Amp Maximum

Cart

Scroll to Top

Level-Trac System Summary

Level-Trac System Summary